Biomin OILSORB

Makers of OilSorb™ and Other State-of-the-Art Filtration Media

Request Biomin's Cost Savings Model and Guides

OilSorb™ Product Guide -

OilSorb™ is a blend of anthracite and bentonite clay that has been impregnated with a quarternary amine. A granular, organically-modified clay filtration/adsorption media for water treatment, OilSorb™ removes mechanically emulsified oil and grease, free oil and high molecular weight organic molecules. It is highly versatile, effective, and can be used in pre-treatment, post-treatment, or stand-alone processes.

Benefits of Use

OilSorb™ is a cost-saving filtration media - When used alone, OilSorb™ removes oil at 700% the rate of activated carbon and will reduce your operating costs by 50% or more. When used as a pre-treatment for activated carbon in applications involving oil and grease removal, OilSorb™ removes the oil and grease effectively, allowing the activated carbon to remove the soluble organic compounds more efficiently. To request a copy of the OilSorb™ Interactive Cost Savings Calculation Model, follow this link: Request Biomin's Cost Savings Model and Guides

OilSorb™ increases the efficiency of the treatment process - The quarternary amine-treated clay pellets have the ability to capture 50 - 60% of their weight in oil, grease and other low solubility organic compounds. Used upstream from activated carbon or downstream of other oil removal processes, OilSorb™ optimizes the overall system performance and reduces costs.

OilSorb™ can be easily disposed of in a variety of ways - For more information on the proper disposal of OilSorb™, please follow this link: Disposal of OilSorb™

OilSorb™ comparison with activated carbon. See the details

Sample Cost Savings Using OilSorb™ Organoclay

If you use OilSorb™ as a pre-polisher for activated carbon to remove traces of oil from water, you will not only get superior results, but superior savings. The following table shows some annual savings you can realize by using OilSorb™:

Annual Savings Using OilSorb™ Organoclay

GPM	1 ppm	5 ppm	10 ppm

20	$ 964	$ 4,818	$ 9,636
80	$ 3,858	$ 19,290	$ 38,580
150	$ 7,228	$ 36,136	$ 72,276
300	$ 14,525	$ 72,726	$ 145,452

Before and After Photo

From left to right:

    1) 3% oil, 3000 ppm emulsified

    2) 200 ppm oil after it passed through an oil/water separator

    3) 1 ppm after it passed through an adsorber filled with OilSorb™

    4) Non-detect after it passed through a carbon tank.

Other Information on OilSorb™

OilSorb™ is approved by the National Defense Department. Here are the National Stocking Numbers issued for OilSorb™ Organoclay by the U. S. Defense General Supply Center - United States Government:

9330-01-416-4350

9330-01-416-4354

9330-01-416-4357

OILSORB™ SPECIFICATIONS See Oilsorb™ Specifications

MATERIAL SAFETY DATA SHEETS

OilSorb™

ColorSorb™

Disclaimer: To the best of our knowledge and belief, the above information is accurate. Because the conditions and use are beyond our control, we cannot guarantee results, and assume no liability for damages incurred in using our product. The above is not to be construed as a recommendation for use in violation of any patents or of applicable laws or regulations.

[ Home ] [ About Us ] [ Products ] [ Services ] [ Technical Bulletins ] [ Case Studies ] [ Testimonials ] [ News ] [ Links ] [ Contact Us ] [ Request More Information ]

Biomin, Inc.

P.O. Box 20028

Ferndale, MI 48220

Phone: 248-544-2552

Fax: 248-544-3733

E-Mail: biomin@aol.com

See Master Mind Marketing Inc with questions or comments regarding this web site.